 |
|
|
 |
|
APOLLO Lens Series
APOLLO round (D=26 mm) lenses have been optimized for Luxeon K2 LEDs, but they work well with other lambertian Luxeon types as well. There are SMOOTH SPOT, OVAL and WIDE versions available. APOLLO lenses are attached to the PCB with an automotive grade adhesive tape. Lenses can be potted to become a fully sealed solution. |
 |
|
EVA Lens Series
Specially designed for Cree’s MC-E series of LEDs. Special care taken to make a uniform white or warm white illumination. Lenses work well with other colors, too. Lens material optical grade PMMA. Allows use of high current and temperature conditions. Best available optical efficiency, up to 90%. |
 |
|
LC1 Lens Series
LC1 round lenses are specially designed for Cree XLAMP XR-E series of LEDs.
Special care taken to make a uniform white or warm white illumination.
Lenses work well with other colors, too. Lens material optical grade PMMA.
Allows use of high current and temperature conditions. Best available optical efficiency, more than 90%, with an extremely good cutoff of light. |
 |
|
LD1 Lens Series
LD1 round lenses are specially designed for Osram Diamond Dragon series of LEDs. Special care taken to make a uniform white or warm white illumination. Lenses work well with other colors, too. Lens material optical grade PMMA. Allows use of high current and temperature conditions. Best available optical efficiency, more than 90%, with an extremely good cutoff of light |
 |
|
LE1 Lens Series
LE1 Round Lens Series are specially designed for LedEngin 5W series of LEDs. Special care taken to make a uniform white or warm white illumination. Lenses work well with other colors, too. Lens material optical grade PMMA. Allows use of high current and temperature conditions. Best available optical efficiency, more than 90%, with an extremely good cutoff of light. Fastening of holder to PCB with appropriate adhesive, e.c. epoxy or polyurethane. |
 |
|
LEDILSTAR-L Lens Series
LEDILSTAR-L round (D=35 mm = MR11) lenses have been optimized for all Ostar Lighting LEDs. There are SPOT and WIDE versions available, giving a smooth, pleasant and round illumination pattern even for the 6-chip configurations of Ostar, with or without lens. LEDILSTAR lenses are attached to the PCB by screwing, gluing or clamping. |
 |
|
LEDILSTAR-P Lens Series
LEDILSTAR-P round (D=35 mm = MR11) lenses have been optimized for all Ostar Projection LEDs. There are SPOT and WIDE versions available, giving a smooth, pleasant and round illumination. For Multicolor versions of Ostar Projection we recommend the use of a special mixing sub lens, which insures a good color uniformity over the whole beam. LEDILSTAR lenses are attached to the PCB by screwing, gluing or clamping. |
 |
|
LM1 Lens Series
Specially designed for Cree MC-E series of LEDs. Special care taken to make a uniform white or warm white illumination. Lenses work well with other colors, too. Lens material optical grade PMMA. Allows use of high current and temperature conditions. Best available optical efficiency, more than 90%, with an extremely good cutoff of light. Fastening of holden to PCB with appropriate adhesive, e.c. epoxy or polyurethane based. |
 |
|
LN2 Lens Series
LN2 round lenses are specially designed for Nichia NS6x083 & NS6x183 series of LEDs. Special care taken to make a uniform white or warm white illumination. Lenses work well with other colors, too. Lens material optical grade PMMA.
Allows use of high current and temperature conditions. Best available optical efficiency, more than 90%, with an extremely good cutoff of light. |
 |
|
LO2 Lens Series
LO2 round lenses are specially designed for Osram Golden Dragon series of LEDs, but works well with Platinum Dragon LEDs too. Special care taken to make a uniform white or warm white illumination. Lenses work well with other colors, too. Lens material optical grade PMMA. Allows use of high current and temperature conditions. Best available optical efficiency, more than 90%, with an extremely good cutoff of light. |
 |
|
LR1 Lens Series
Specially designed for Luxeon REBEL series of LEDs.
Special care taken to make a uniform white or warm white illumination. Lenses work well with other colors, too. Lens material optical grade PMMA. Allows use of high current and temperature conditions. Best available optical efficiency, more than 90%, with an extremely good cutoff of light. |
 |
|
LXP Lens Series
Specially designed for Cree XLAMP XP-E series of LEDs.
Special care taken to make a uniform white or warm white illumination.
Lenses work well with other colors, too. Lens material optical grade PMMA.
Allows use of high current and temperature conditions. Best available optical efficiency, more than 90%, with an extremely good cutoff of light. |
 |
|
LZ1 Lens Series
Specially designed for Seoul Semiconductor P4 series of LEDs. Special care taken to make a uniform white or warm white illumination. Lenses work well with other colors, too. Lens material optical grade PMMA. Allows use of high current and temperature conditions. Best available optical efficiency, more than 90%, with an extremely good cutoff of light. |
 |
|
NATALIE Lens Series
NATALIE lens designed for Osram Ostar with primary lens. Works well for Cree Xlamp XR-E, Seoul P4 & Acriche and Luxeon K2 as well, but needs another optical positioning. Lens material optical grade PC with high UV and temperature resistance (135°C/260°F). Allows use of high current and temperature conditions. Best available optical efficiency. Fastening to heat sink with 3 snap fits. Compact dimensions: lens height is 6 mm, diameter 35.6 mm. Especially suitable for MR16 replacement modules. |
 |
|
RGB-X Lens Series
RGB-X lens specially designed for LedEngin RGB (10W) series of LEDs.
Special care taken to make a uniform RGB. Lens material optical grade PMMA.
Allows use of high current and temperature conditions. Best available optical efficiency, up to 90%. |
 |
|
SPUTNIK-R Lens Series
SPUTNIK-R round (D=26 mm) lenses have been optimized for the Seoul Semiconductor P5 LEDs. There is one MEDIUM version available, with a very good color mixingstructure. giving a smooth, uniform color output. SPUTNIK-R lenses are attached to PCB with an automotive grade adhesive tape. Lenses can be potted to become a fully sealed solution. |
 |
|
SPUTNIK-Z Lens Series
SPUTNIK-Z round (D=26 mm) lenses have been optimized for the Seoul Semiconductor P3 and P4 LEDs. There are SMOOTH SPOT, OVAL and WIDE versions available. SPUTNIK-Z lenses are attached to PCB with an automotive grade adhesive tape. Lenses can be potted to become a fully sealed solution. |
 | | TINA Lens Series
Lens material optical grade PMMA with high UV and temperature resistance (105°C/220°F).
Lens holder molded of high quality white ABS. High optical efficiency, >80%.
Attaching of the lens holder directly on the Dragon package by snap fits. For detailed mounting information, please look at the drawing and the photograph. Very small and compact dimensions: Diameter 16 mm, height 8.63 mm. |
 |
|
TINA-N083 Lens Series
TINA-N083 round lenses are specially designed & optimized for Nichia's 083 series of LEDs. Lens material optical grade PC with high UV and temperature resistance (130°C/220°F). Allows use of high current and temperature conditions.
Best available optical efficiency, over 90%, with an extremely good cutoff of light. Fastening to heat sink with a PU foam adhesive tape of automotive grade (included). Compact dimensions 16.1 x 10.1 mm. |
 |
|
TINA-O+ Lens Series
TINA-O+ round lenses are specially designed & optimized for Osram Golden Dragon series of LEDs. Lens material optical grade PC with high UV and temperature resistance (130°C/220°F). Allows use of high current and temperature conditions. Best available optical efficiency, over 90%, with an extremely good cutoff of light. Compact dimensions 16.1 x 10.1 mm. |
 |
|
TINA-XP Lens Series
TINA-XP round lenses are specially designed & optimized for Cree's XP-E series of LEDs. Lens material optical grade PC with high UV and temperature resistance (130°C/220°F). Allows use of high current and temperature conditions. Best available optical efficiency, over 90%, with an extremely good cutoff of light. Compact dimensions 16.1 x 10.1 mm. |
 |
|
TITANUM Lens Series
TITANUM round (D=26 mm) lenses have been optimized for the newest Dragon packages, but they work with old Dragon types as well. There are SMOOTH SPOT, OVAL and WIDE versions available. TITANUM lenses are attached to the PCB with an automotive grade adhesive tape. Lenses can be potted to become a fully sealed solution. |
 |
|
TWIDDLE-083 Lens Series
TWIDDLE-083 round lenses are specially designed for Nichia NS6x083 series of LEDs.
Special care taken to make a uniform white or warm white illumination. Lens material optical grade PMMA Integrated holder. Fastening to heat sink with a PU foam adhesive tape of automotive grade. Compact dimensions 21.6 x 14.4 mm. Square form enables easy build of matrix without any gaps between lenses. New PATENT PENDING "Omni-directional" technique, allows freely swivel the lens and its light distribution in any angle within +/- 15 degrees from the nominal position. |
 |
|
TWIDDLE-XR-E Lens Series
TWIDDLE-XR-E round lenses are specially designed for Cree XR-E series of LEDs. Special care taken to make a uniform white or warm white illumination. Lens material optical grade PMMA. Integrated holder. Fastening to heat sink with a PU foam adhesive tape of automotive grade. Compact dimensions 21.6 x 14.4 mm. Square form enables easy build of matrix without any gaps between lenses. New PATENT PENDING "Omni-directional" technique, allows freely swivel the lens and its light distribution in any angle within +/- 15 degrees from the nominal position. |
 |
|
ROCKET Lens Series
ROCKET round (D=26 mm) lenses have been optimized for Cree XR-E LEDs, but they work well with other XR types as well. There are SMOOTH SPOT, OVAL and WIDE versions available. ROCKET lenses are attached to the PCB with an automotive grade adhesive tape. Lenses can be potted to become a fully sealed solution. |
