 |
|
|
|
|
|
| |
for Lumileds™ Luxeon® Series
Product
Code |
Type |
FWHM Angle |
Tested
LED |
Spot
(-S) |
Real Spot
(-RS) |
Smooth Spot
(-SS) |
Diffuser
(-D) |
Medium
(-M) |
Wide
(-W) |
Oval
(-O) |
| APOLLO |
Round |
K2
(AlInGap) |
|
|
±4° |
|
±13° |
±33° |
±7° x ±18° |
K2
(White) |
|
|
±4° |
|
±13° |
±33° |
±6° x ±17° |
| K2S |
Square |
K2 |
|
±4° |
±6° |
±9° |
±15° |
±30° |
±7° x ±22° |
| RES |
Square |
Rebel |
|
±3° |
±5° |
±9° |
±15° |
±30° |
±6° x ±22° |
| RER-5 |
Multi |
Rebel |
|
|
|
|
±12° |
|
|
| APOLLO-3 |
Triple |
Luxeon I & III
(White) |
±4° |
|
|
|
±14° |
±30° |
|
Luxeon K2
(White) |
±5° |
|
|
|
±15° |
±30° |
|
| FLARE |
Linear |
±6° x ±80° |
| SNOWWHITE |
Potable Device |
±18° x ±24° |
|
|
|
 |
|
APOLLO Lens Series
APOLLO round (D=26 mm) lenses have been optimized for Luxeon K2 LEDs, but they work well with other lambertian Luxeon types as well. There are SMOOTH SPOT, OVAL and WIDE versions available. APOLLO lenses are attached to the PCB with an automotive grade adhesive tape. Lenses can be potted to become a fully sealed solution. |
|
 |
|
K2S Lens Series
K2S square lenses have been optimized for Lumileds Luxeon K2 LEDs, but they work well with other lambertian Luxeon types as well. There are REAL SPOT, SMOOTH SPOT, DIFFUSER, MEDIUM, WIDE and OVAL versions available. K2S lenses are attached to the PCB with an automotive grade adhesive tape. Lenses, preassembled to the lens holder and tape are delivered on tape liner sheets. |
|
|
|
RES Lens Series
RES square lenses have been optimized for Lumileds Luxeon Rebel LEDs. There are REAL SPOT, SMOOTH SPOT, DIFFUSER, MEDIUM, WIDE and OVAL versions available. RES lenses are attached to the PCB with an automotive grade adhesive tape. Lenses, preassembled to the lens holder and tape are delivered on tape liner sheets. |
|
 |
|
APOLLO Triple Lens Series
APOLLO-3 triple (D=50 mm = MR16) lenses have been optimized for Luxeon K2 LEDs, but they work well with other lambertian Luxeon types as well. There are SPOT and MEDIUM versions available. APOLLO-3 lenses are attached to the PCB by melting or gluing of the lens legs. |
|
 |
|
RER-5 Quintuple Lens Series
RER-5 Quintuple (D=35.5 mm = MR11) lens has been optimized for Luxeon Rebel LEDs. There is MEDIUM version available. RER-5 lens is snap-fitting of the lens to customer's heat sink. |
|
 |
|
FLARE Lens
FLARE lens gives a horizontally very wide, but vertically narrow stripe of light. FLARE lens is optimal for Beacon and other 360° warning lamps and for linear lights, where an absolute smoothness is needed. Flare lens is attached to the PCB with 2 screws. |
|
 |
|
SNOWWHITE Portable device Lens
SNOWWHITE is a low-profile (2,3 mm), square (5 x 5 mm) lens giving a rectangular illumination pattern. SNOWWHITE lens is optimal as a mobile phone or a digital camera flash light lens. SNOWWHITE lens is attached to the PCB with glue. |
|
©
LED-SPOT.com (Marubeni America Corporation Silicon Valley Office) All rights reserved.
|
|---|
|
|
| |
